It has been a hot couple of weeks on the Rock Farm.  We have been busy watering trees, feeding cattle and trying to stay cool.  The bush-fires have been an ever present threat.  This instalment comes from the (not so) Little Fisherman. 

Due to the weather, we have not been able to work much on the float since the other Little Helper did his last blog (The Little Helper’s Holiday Project (Part 1)).  The last couple of days have been total fire bans with one of the days even being a catastrophic fire danger day.  But the next day brought some relief.  The temperature was set to be a maximum of 28 degrees Celsius, and the fire ban had been lifted!

We decided to use the break in the weather to replace some of the rusted frames in the float.  Our replacement bar for one of the more rusted floor sections, was slightly to small and did not have the strength needed of it (Dad will take more care to purchase steel of the correct dimensions next time).  Despite this, we still managed to replace some of the other frames on the side of the float.

This turned out to also be the perfect time for me to hone my grinding skills…  Although it took a while, I managed to successfully remove one of the old bars and clean up the cuts, before cutting a new piece (A tad to long).  I also asked dad if I could weld the bar in place, but after watching him struggle to weld the thin steel we decided that I would do more harm than good.  Instead, I took my new-found grinding skills to finish making my mother’s Christmas present.

After the horizontal struts were in place, we realised that we needed to replace one of the vertical supports.  This meant that dad had to cut up some of his pre-existing welds to put the new piece in place.  Let’s just say, I don’t think that he was to happy with having to re-weld the weak steel.

Meanwhile, the little helper was cleaning up the tailgate with a wire brush and a lot of elbow grease.  After he had finished polishing off the tailgate, he proceeded to rust-proof all the exposed metal he could lay eyes on with some ‘Rust Converter’ (phosphoric acid).

A couple of days later, the weather cooled down again.  We took this opportunity to remove the fibreglass section of the roof.  This proved somewhat difficult as many of the rivets where rusted in place.  We ended up drilling out the rivets.  After some effort we got the roof down, where it now lies, waiting to be sanded, patched and painted.

All in all, we have made many very important structural repairs and have begun looking at the roof.  Hopefully the next blog will be about reattaching the roof and possibly finishing our structural repairs.  We are looking forward to being able to start re-assembling the body of the horse float soon.

For something different, the (not so) little helpers have a school holiday project that they will work on over summer.  Not only that, they have agreed to update their progress online.       They have a tight budget to work on, but we hope to turn this old float into some pocket money.  The main priority is to make the float completely solid and safe, not just to drive on the road, but also to carry precious horses in.  Turning a profit would also be nice – and should be achievable when you’re used to earning $10 per hour….  But enough from me – over to the Little Helper for his take on the holiday project.  

 

The school days are over, and on the Rock Farm the holidays have started. It’s great to lie back, throwing a ball for a very energetic dog, whilst enjoying a smoothie that would break the world record for the most sugar consumed at once. And it’s awesome the sleep in and not wake up at six o’clock to catch the school bus. Holidays are fantastic.

They are also good to look back on the year and see what we achieved, what happened, what went wrong, and what we can do next time.  Something that I noticed about this year, is that my brother and I achieved almost nothing together. Sure, there were the days where we made catapults, swords, and things to whack each other with, but there was nothing where we did something to learn new skills. (comment from Dad – I would disagree – I love the things they have done where the didn’t even realise they were learning!).

So, these holidays we asked Dad for help, and we started a new project – horse float restoration.

There has been an old horse float down near the stables. It hasn’t been undercover and it has just sat there, rotting itself apart. With the help of Dad, the ute, and the air compressor, we got the old float up to the shed for some pretty major repairs.

We started by taking the wheels off, and after years of rust, the nuts holding the wheels on weren’t feeling like moving. Even after I stood on the tyre lever trying to make the bolts spin, the nuts stayed attached. Only Dad could undo those bolts.

After the wheels were sent rolling, we started taking out the floor. This was more challenging than we had hoped because the bolts had rusted so much there was basically nothing left of them.  The old nuts had seized to the metal frame. So, we called in Dad with the grinder. After an hour of grinding, levering, and swearing (comment from Dad – speak for yourselves!), we pulled the hardwood beams from the frame.

This was all that we could achieve at the time, because the following few days were forecast to be above 40 degrees with total fire bans in place. Sadly, taking apart the horse float involves a lot of sparks.

But there was still one thing we could do: paint scraping.

To be honest, I am so over using the wire brush and chisel. After scraping every single piece of paint off, every side, every corner, we could finally put down the brush and smile. But that’s only the start. We still need to put the rust preventer on that Dad got us, and then paint, replace the rusted beams, put the floor back in, redo the wiring, replace the springs, check it all works, and make it look nice.

We have some more to do, but due to the heat we can’t progress at the moment. So for the time being, we can go back to our smoothies, and relax.